Fiddes Hardwax-Oil, White Finish, 1L

£32.63   per Can,   Inc. VAT   Ex. VAT

Buy More & Save!

Buy 2+ can for £31.63 per can, Ex. VAT
Buy 2+ can for £37.96 per can, Inc VAT

A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.

Fiddes Hardwax-Oil, Matt Finish, 2.5L produces a quick-drying, natural matt water repellent, tread-fast finish that will not peel or flake. To maintain/renovate, simply wash, buff or re-apply, following the guidelines below.

Suitable for application onto children’s toys – EN 71-Toy Safety Certification

Resistant to liquids: Tested in accordance with BS 3900 G5

Resistant to wear: Tested in accordance with BS3900 E15

Preparation

Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150-grade sanding paper or 150 grit sanding disk, removing all traces of dust.

Application

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly and does not require thinning.

First Coat - Stir contents thoroughly before and during use, and apply in a warm, well-ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight.

Second Coat - Apply as the first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level.

Ensure all areas to be coated are extremely well ventilated during and after the application has occurred.

Always test on a small area prior to major application.

Certain dense or oily substrates may only require a single application and subsequently buffed to achieve the desired finish.

Longer drying periods may occur during application in cold, damp or humid conditions.

Always apply sparingly and remove any excess product thoroughly.

Re-Application: To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

Coverage: A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.

Packaging: 250ml - 1lt - 2.5lt - 25lt

product barcode 5060147671506

Sealant & Lacquer Specification
Coverage 20 - 24m²/L
Component Base One Component
Drying Time Approx. 12 hours
Application Tools Brush, Roller or Cloth
Pack Size 1L
Colour White
Fiddes Hardwax-Oil, White Finish, 1L FXOWF1

Related products